Home > AR-15 Barrel Assemblies >

  BCM 16" SS410 Barrel with Mid Length Gas (stripped) 1/8 Twist (Ionbond BLACK)

BCM 16" Recce Barrel with Mid Length Gas
BCM 16" Recce Barrel with Mid Length Gas

Alternative Views:

List Price: $435.00
Our Price: $369.00

Stock Status:In Stock
Product Code: BCM-BRL-SS410-16-8-IB-BK

Requires the use of the .750 gas block
Approximate Weight: 2lbs 1oz.
BCM SS410™ Barrels
This BCM stripped barrel is machined from a 410 stainless steel. It features hand lapped button rifling with a 1/8 twist rate and M4 feedramps. As with all BCM barrels it is proofed (HPT) and magnetic particle inspected (MPI). To give the shooter the best balance of weight and accuracy this BCM Recce barrel has a mid-weight profile and a mid-length gas system. (410 stainless is a harder and more corrosion resistant than the conventional 416 stainless found in most barrels.)
Ionbond coatings advantages
• reduced coefficient of friction
• increased abrasive wear resistance
• anti-scuffing/anti-galling
• high fretting resistance
• high pitting resistance
• resistance to corrosion and hydrocarbon fuels
• high integrity of surface structure
• good adhesion to base materials
IonBond coatings directly improve wear resistance due to their high hardness, low coefficient of friction and high structural integrity. These coatings with thicknesses of only a few microns and with hardness up to 4000HV, result in increased firearm life and functionality. The IonBonded finishes, absorb oil and release it over time due to the unique characteristics.
Requires the use of the .750 gas block.
  • M4 Feed Ramp Barrel Extension
  • Mid Length Gas System
  • 1/8 Twist Rate
  • 5.56 NATO Match Chambers (USMC SAM-R Chamber)
  • 410 Stainless Steel
  • Mid Weight Contour Profile Barrels
  • Button Rifled
  • Hand Lapped Rifling
  • HPT (High Pressure Test) Barrels
  • MPI (Magnetic Particle Inspected) Barrels

Average Customer Review: 5 of 5 Total Reviews: 3 Write a review.

  0 of 0 people found the following review helpful:
first build February 13, 2016
Reviewer: Dennis Wright from Green Springs, OH United States  

Was this review helpful to you?

  4 of 4 people found the following review helpful:
Doesn't Get Better September 26, 2013
Reviewer: Anonymous Person from Linden, MI United States  
Was fortunate to be able to use this barrel for my first build from scratch.  After purchasing and shooting several AR's I was really looking forward to what a good build could be.  During break in I was amazed at the accuracy and smoothness. Cold or hot, doesn't bother this barrel. With my 50x out to the 300 meter lane 30 shots in a quarter. On a bi-pod on a bench but one shot after the other.  doesn't get better!

Was this review helpful to you?

  14 of 16 people found the following review helpful:
The best is always worth the price... January 23, 2011
Reviewer: nv shooter from Nevada, United States  
Purchased late October 2010. Beautifully machined. Appealing appearance with its Ionbond finish. The product description leaves out that there is a dimple on the barrel directly under the gasport for sight bases that use allen screws to secure the base to the barrel. No shots through it at this date, but I know in my heart it's a winner...

As of late January 2011, I have taken this barrel to the range and have shot it maybe 100 times. Very accurate. Puts them into the same hole at 50 and 75 yards with a 1X red-dot sight and an inexpensive scope from the world's largest retailer. I don't plan to sight it out any farther, but I believe this barrel will drill 'em just as well at 100, 200 and farther out. I am very pleased. Because this barrel is 410 stainless, it will still be shooting good when I'm geezing hard...

Was this review helpful to you?

Browse for more products in the same category as this item:

AR-15 Barrel Assemblies
AR-15 Barrel Assemblies > 16" Barrels