Home > Upper Receiver Groups AR15 : LMT, BCM, Stag Arms > BCM® Upper Receiver Groups with KMR (KeyMod™) Handguards > BCM® Upper Receiver Groups with KMR (Magnesium) Handguards >

  BCM BFH 16" Mid Length Upper Receiver Group w/ BCM KMR 15" Handguard

BCM BFH 16" Mid Length Upper Receiver Group w/ KMR 15" Handguard
BCM BFH 16" Mid Length Upper Receiver Group w/ BCM KMR 15" Handguard


 
Alternative Views:


List Price: $941.95
Our Price: $761.95
You save $180.00!


Stock Status:(Out of Stock)
Product Code: BCM-URG-MID-16-BFH-KMR15

Add BCM® Bolt Carrier Group with Upper Group

Add BCM® Bolt Carrier Group?*:
   The one and only BCM® milspec Bolt Carrier Group!
Charging Handle Options

  
Muzzle Device

  

Qty:  
Description FAQs
 

Bravo Company MFG, Inc.
Specifications: Barrel, Forged, Hammer (BFH)
PLEASE NOTE: These batches will sell out quickly.
If the Stock Status is Out of Stock and you would like to get notification when more product arrives, please click the "Email me when Back-In-Stock" link under the Add To Cart button. You will get immediate notification of all new arrivals of product.
If you get an email notification and you check back again with our website to see that the product has already again sold out, please click the link again and add your email to the notification list.
Please check back with our website often. Sorry but we cannot take pre-orders or backorders on these products.
Professional Grade Weaponry, by BCM®
Made by Bravo Company MFG, Inc. (BCM) These Barreled Upper Receiver Groups are designed for shooting professionals with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.
Cold Hammer Forged Barrels
This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH™ series of barrels are made right here in the USA! (Just like all the BCM products.)
M4 Feed Ramp Barrel Extension
M4 Feed Ramp Flat Top Receiver
In developing the USGI M4 carbine as one of the primary weapons for today’s infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM uppers and all BCM barrels.
T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military and private security personal for its’ superior ballistics.
Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its’ additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960’s was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and on the USGI M16/M4 rifles will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military ammo.
Mil-Spec F-Marked Forged Front Sight Bases
Mil-Spec for rifles issued to the troops require taller front sight bases on all flat top AR rifles. Many commercial offerings use M16A2 height front sight bases on all of their barrels regardless of what type of upper it is installed on. As a result, owners of rifles and carbines with the flat top receiver configuration can have problems getting a proper 'zero' for elevation with Mil-Spec back up iron sights. As all of the BCM uppers are built for flat top uppers, all have the proper Mil-Spec F marked front sight base to insure the correct height for iron sight zeroing when using military iron sights. Mil-Spec taper pins secure the forged front sight base with the sling swivel secured by tubular rivets.
Government Barrel Profiles
Duty rifles are built to be carried - day in and day out. The USGI barrel profiles (often referred to as the Government Profile) enable the operator to carry their weapon for longer periods of time and deploy them faster than the heavier commercial H-Barrel counterparts. The government profile barrel is also compatible with the current M203 mounting systems.
HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
Copyright © 2010-2014 Bravo Company MFG, Inc.
Features
  • Cold Hammer Forged Barrels

    M4 Feed Ramp Barrel Extension

    M4 Feed Ramp Flat Top Receiver

    T-Marked Upper Receivers

    USGI 1/7 Twist Rates

    USGI 5.56 NATO Chambers

    Mil-Spec 11595E - Certified Barrel Steel (CMV)

    Chrome Lined Bore and Chamber

    Manganese Phosphate Barrel Finish

    Mil-Spec F-Marked Forged Front Sights

    USGI Government Profile Barrels

    HPT (High Pressure Test) Barrels

    MPI (Magnetic Particle Inspected) Barrels

Average Customer Review: 5 of 5 Total Reviews: 5 Write a review.

Related Products
BCM BFH 16" Mid Length Upper Receiver Group w/ BCM KMR-*ALPHA* 15" Handguard
Our Price: $684.95

Add
BCM BFH 16" Mid Length Upper Receiver Group w/ BCM KMR-*ALPHA* 15" Handguard


  0 of 0 people found the following review helpful:
 
Excellent Product November 6, 2015
Reviewer: Albert Ortiz from Long Beach, CA United States  
I have had this complete upper since May and it is excellent. Extremely accurate and high quality.  For what you get in this package and the results it's very hard to beat. I also love the 15" KMR and have had no issues with with. I strongly recommend this upper.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
The new ultra-light tank of an upper. November 2, 2015
Reviewer: Gregory Sullivan from Boynton Beach, FL United States  
Just received the upper in the mail yesterday, and will be taking it to the range today. First impressions are:
1- I'm blown away by how light it is. I am going from a standard mil spec carbine length system with a fixed front sight / gas block assembly and Magpul MOE (carbine length) fore-grip to this system. Being free float, with a TON of rail space, I expected to be gaining a few ounces, instead I shaved a few. (which may level out once I put MBUS Pros on it)
2- This thing is built like a damn tank. I sincerly feel that this will outlast me, my kids and maybe even theirs.
3- Fast shipping -  took 5 days from me placing the order (over the weekend)
4-Holy crap do they send a ton of swag. its more than I've ever gotten from a company, and its not just a few stickers (though there were a ton of them, too)

I will be updating this as I get back from the range with how the groups are holding . - I can't wait!


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Fantastic upper! November 2, 2015
Reviewer: Ed from Abingodn, MD United States  
These things sell out quick so get yours while you can.  Shipping was quick and the upper performed great.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
BCM BFH 16" Upper Receiver Group November 2, 2015
Reviewer: Brian from CA United States  
Best product in its class! I would highly recommend this Upper Receiver Group to anyone looking to build their own AR...and i have recommended this to several friends already! Great product gentlemen!!

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
Simply the best! November 2, 2015
Reviewer: Andrew Hyatt from North Carolina, USA  
This upper completed my Spikes/BCM carbine build. I mounted an Aimpoint PRO and some magpul pro BUIS on it and took it out for some practice. It is light weight, and amazing to handle. The MOD 0 compensator  helps with recoil and keeps things on target. The KMR handguard is amazing, the extended length allows me to hold the rifle right at the muzzle which helps with control, especially when swinging from target to target.

I would buy from BCM again or recommend them to anyone. Great job guys! You are truly a top notch company!

Was this review helpful to you?


Browse for more products in the same category as this item:

Upper Receiver Groups AR15 : LMT, BCM, Stag Arms > BCM® Upper Receiver Groups with KMR (KeyMod™) Handguards > BCM® Upper Receiver Groups with KMR (Magnesium) Handguards
Upper Receiver Groups AR15 : LMT, BCM, Stag Arms > 16" Mid Length Upper Group
Upper Receiver Groups AR15 : LMT, BCM, Stag Arms
Upper Receiver Groups AR15 : LMT, BCM, Stag Arms > BCM® Upper Receiver Groups
Upper Receiver Groups AR15 : LMT, BCM, Stag Arms > BCM® Upper Receiver Groups > BCM Upper Receiver Groups with BFH™ Barrels
Upper Receiver Groups AR15 : LMT, BCM, Stag Arms > 16" Recce Upper Groups (Mid Length)
Upper Receiver Groups AR15 : LMT, BCM, Stag Arms > BCM® Upper Receiver Groups with KMR (KeyMod™) Handguards