BCM® Standard 11.5" Carbine (ENHANCED LIGHT WEIGHT), Stripped

MSRP: $429.00
Your Price: $279.00
(You save $150.00 )
SKU:
BCM-BRL-11-ELW-STD
Maximum Purchase:
5 units
Stock Status:

Out of stock


BCM® Exclusive Design

Continuous taper designed for optimal weight, balance, and performance on a semi-automatic carbine.

Heavier profile toward the rear near chamber area.

Thinner tapered profile out front.

No sharp handguard cap shoulder for improved barrel harmonics.
Approximate Weight: 1lb

Please note for gas block selection, barrel journal measures .625"



Approximate Weight: 1lb
 
Bravo Company MFG, Inc. Introduces a New Series of Barrels!
Specifications: Barrel
 
 
PLEASE NOTE: These batches will sell out quickly.
If the Stock Status is Out of Stock and you would like to get notification when more product arrives, please click the "Email me when Back-In-Stock" link under the Add To Cart button. You will get immediate notification of all new arrivals of product.
If you get an email notification and you check back again with our website to see that the product has already again sold out, please click the link again and add your email to the notification list.
 
Please check back with our website often. Sorry but we cannot take pre-orders or backorders on these products.
 
 
 
Life Saving Tools, by BCM®
 
 
These are stripped 11.5" Carbine gas, Forged Barrels with gas ports installed and dimpled for a strong gas block installation.
 
 
M4 Feed Ramp Barrel Extension
In developing the USGI M4 carbine as one of the primary weapons for todays infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM barrels.
 
 
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM® barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military and private security personal for its superior ballistics.
 
Mil-Spec Barrel Steel (Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. The Mil-Spec grade steel gets its additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
 
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960s was the addition of the chrome lined bore and chamber. It is now a world wide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and on the USGI M16/M4 rifles will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
 
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
 
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military ammo.
 
 
 
HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
 
Copyright 2009 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

21 Reviews

  • 5
    A good choice for a Mark 18 build

    High quality, good accuracy, just the right dwell time for .556.

  • 5
    Fast shipping and great product.

    The Barrel shipped fast and came well packaged . The quality and finish of the barrel was great. I am always glad to do business with BravoCompany.

  • 5
    Best there is!!!

    This is an awesome barrel! Quality is perfect! As always BCM is just plain and simple the best!!! Keep it up guys!! The only products I run are Bravo products! They are tried and true!! Looking forward to my next purchase!

  • 5
    Customer review

    Top quality parts fast shipping.

  • 4
    Good quality at a competitive price.

    Nothing to complain about with this barrel. Much smarter than a GI profile, was well finished and is dimpled below the gas block to act as an effective index point to locate the gas block making that super easy. I get +/- 3 MOA with 10 rounds at 100 yards with my favorite 55gr. ammo using a red dot while doing the mag monopod prone thing.

  • 5
    Customer review

    Review body is empty

  • 5
    11.5 barrel

    Love the barrel! Goes perfect with 10” mlok handguard. It does tend to get really warm after 120 rounds(in Arizona). Overall it is exactly what I needed.

  • 5
    Excellent Product

    This product is just as described. I could not believe how lightweight it is and how durable it feels at the same time. Very easy to install after watching a youtube video showing step by step instructions. Shipping was fast as always. Love this company and will continue to order from them.

  • 5
    BCM is Life

    Amazing! Smooth as butter!