SureFire® Scout Light® - KeyMod Version
Fully ambidextrous: made to mount
flush or cantilever off either the left or right side of the rail system.
Designed for use with Surefire’s™
Scout Light mounting interface.
Multiple mounting holes for ideal
Designed to mount on the 3 or 9
o’clock rail positions.
Durable Aluminum construction. Intently
designed to be low-profile and snag-free.
Patent Pending mounting system.
Minimal added weight, 0.5 oz.
BCM US Patent Number 9,377,274
1. Ensure the weapon system is unloaded and clear, prior to
performing any maintenance.
one of the two Scout Light mounting positions on the mount and install the
mounting screws supplied with the Surefire™ Scout Light.
the light body screws (clockwise) until firmly secured (25 in-lbs.).
supplied Torx™ wrench, loosen (counter clockwise) and remove the two mounting
screws and the one recoil lug screw.
the six mounting position holes on the mount, select the desired holes for all
mounting screws and recoil lug screw placement will vary, depending on mount
placement, left or right hand side of the rail.
the mounting screw location selected and the screws loosened, locate the
desired KeyMod placement on the rail system, install and slide forward until it
travels no further Tighten all screws (clockwise) until firmly secured (30
a better, more secured hold, use blue thread locking compound on mounting screw
Not compatible with the following: