Home > BCMGUNFIGHTER™ Vertical Grips >

  BCMGUNFIGHTER Vertical Grip Mod 3-KeyMod™ - Flat Dark Earth

BCMGUNFIGHTER Vertical Grip Mod3 KeyMod - Flat Dark Earth
BCM GunFighter's Vertical Grip MOD 3 - KeyMod™


 
Alternative Views:


List Price: $21.00
Our Price: $18.95

Stock Status:In Stock
Product Code: BCM-VG-KM-MOD-3-FDE
Qty:

Description
 

The BCMGUNFIGHTER™ VG-KeyMod-Mod-3

Direct Attach to KeyMod™ Version

  • Low-profile length for increased mobility and decreased “snag” factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip.
  • Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
  • Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
  • Made in the U.S.A., manufactured from high quality, impact resistant polymers.

Tools needed: T15 Torx Driver (not supplied)


  • Insert tool (T15 Torx™ driver) into the screw from under the BCM® KeyMod™ Vertical Grip
  • Push tool into the screw to extend the KeyMod™ anchor, making it protrude from the top.
  • Align the anchors in the two selected large holes of the desired KeyMod™ slots. Grip can be installed in your desired orientation, angled forward or back.
  • After the anchor is inserted, slide the BCM® Vertical Grip forward until it travels no further.
  • Push the BCM Vertical Grip against rail, engaging the accessory’s recoil lugs to the intersecting KeyMod™ opening.
  • With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 40 Inch-lbs. plus quarter turn).
  • Ensure there is no wiggle or forward/backward movement once tight.

*Blue thread locker may be used on threaded fasteners


Average Customer Review: 5 of 5 Total Reviews: 30 Write a review.

  0 of 0 people found the following review helpful:
 
BCMGUNFIGHTER vertical grip mod 3 September 22, 2016
Reviewer: Andrew Soule from Greenville , SC United States  
Easy installation and rock solid lockup. Looks great and helps to better control rifle. Great product and service.  BCM does it again!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
BCMGUNFIGHTER Vertical Grip Mod 3-KeyMod September 22, 2016
Reviewer: M Regan from Ewa Beach, HI United States  
I like the short grip over the full size models. Very comfortable. Color is FDE but seems a little light compared to the other FDE products.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great September 22, 2016
Reviewer: Zack  
Mounts up nice and solid.  The slight tilt to it makes it easy to grip or pull against.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Vertical grip September 22, 2016
Reviewer: michael ogle from glendale, WI United States  
Sturdy, easy to install, fast shipping. The shade is a little off of other companies dark earth color but still looks good. I also like the angle of the grip.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good grip September 22, 2016
Reviewer: JT from KY  
Just what I was looking for. Not too long but enough to grip on to

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

BCMGUNFIGHTER™ Vertical Grips
Stocks, Grips, and Handguards: Vltor, Magpul, Tango Down, etc > Vertical Fore Grips
Stocks, Grips, and Handguards: Vltor, Magpul, Tango Down, etc
KeyMod™ Accessories
Junk On Bunk 1