Home > AR-15 Barrel Assemblies >

Daniel Defense 10.3" 300BLK Pistol, 1:8, S2W® Profile

Daniel Defense 10.3" 300BLK Pistol, 1:8, S2W® Profile
Daniel Defense 10.3" 300BLK Pistol, 1:8, S2W® Profile

List Price: $290.00
Our Price: $275.00
You save $15.00!

Stock Status:(Out of Stock)
Product Code: DD-00253-10.3


Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

All Daniel Defense cold hammer forged barrels are made from start to finish in our state-of-the-art facility located in Black Creek, GA. In keeping with our heritage of not cutting corners, all cold hammer forged barrels feature a forged chamber and heavy phosphate exterior coating. They are all MP tested on-site and will prove themselves to be more accurate and last longer than a barrel that has cut or button rifling.

NFA Disclaimer

Once this part is assembled into a complete firearm, it becomes a regulated item by the National Firearms Act (NFA). Please check with your local and state municipalities for any further regulatory requirements. It is the buyer’s responsibility to make sure they comply with all NFA rules and applicable laws.

Warranty Statement

Our Cold Hammer Forged Barrels carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your barrel shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your barrel in the most expeditious and inexpensive manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer’s products. Be sure to retain your sales slip as proof of purchase date when making a claim.

Additional Information:

Manufacturer Number 36-116-00253-107
Barrel Configuration Stripped
Barrel Length 10.3"
Manuf. Process Cold Hammer Forged
Twist Rate 1:8
Muzzle Thread 5⁄8×24 TPI (Threads Per Inch)
Material Chrome Moly Vanadium
Outside Finish Salt Bath Nitride
Diameter At Gas Port .750″
Chrome Lined No
Barrel Extension A4
Profile S2W® [Strength 2 Weight]
Gas System Pistol Length
Barrel Caliber 300 BLK
Manufacturer Daniel Defense

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

AR-15 Barrel Assemblies
AR-15 Barrel Assemblies > 9", 10", 11.5", and 12.5" Barrels