Midwest Industries MCTAR-17

Home > Tactical Handguards: Daniel Defense, YHM, LaRue Tactical, Troy Ind, Midwest Industries, etc > Non Free Float >

MI#17 Carbine 2 Piece Tactical Handguards

MI#17 Carbine 2 Piece Tactical Handguards

List Price: $159.95
Our Price: $129.95

Product Code: MCTAR-17

Type of Barrel

Description

Easy Install !!

Two Piece tactical handguards made for an AR15 with a carbine length gas system.

Made by MI (Midwest Industries, Inc.) CNC machined from aircraft grade lightweight aluminum and hard coat anodized to milspec. Features USGI type laser etched T-marks to provide addressing for mounting and remounting accessories.

These AR15 carbine handguards provide a modular platform for mounting of tactical accessories such as vertical grips, laser sights, LAMs, flashlights, sling mounts, bipods, and optics. These handguards simply snap in place of your standard plastic handguards and lock up tight! Because of this easy installation, they can be easily removed when cleaning and maintaining the rifle. (This is not a free float design).

Please Note: There are currently two Carbine #17 models available. Because Colt uses a slightly different shaped handguard cap, there is a model #17 for carbine uppers other than Colt, and a model #17C for Colt carbine uppers.

If your upper is not a Colt product, please order a MI#17.

If your upper is a Colt product, please order a MI#17C.

See Options Above

Generation 2 Model - 9.9 oz.

Features

Made For AR15/M4 Carbines
No Gunsmith Installation. (Simply install like factory plastic units.)
MIL-STD 1913 Rails.
Solid Lock-up.
T-marked For Accessory Location.
Constructed of 6061 Hard Coat Anodized For a Lifetime of Service.
Grenade Launcher or Shotgun Compatible With Lower Section Removed.
High Quality at an Affordable Price.

Average Customer Review: Based on 17 Reviews. Write a review.

Related Products...

Midwest Industries MCTAR-17X

Our Price: $159.00
Add

Midwest Industries MCTAR-19

Our Price: $179.95
Add

Troy Ind. Tactical Free Float - Carbine

Our Price: $149.00
Add

Midwest Industries MCTAR-03

Our Price: $19.50
Add

YHM 2 Piece Tactical Handguards Rifle Length

Our Price: $149.95
Add

0 of 0 people found the following review helpful:

Get's the job done !!	August 9, 2008
Reviewer: Scott Rigg from Highland Heights,�KY�United States

I admit I'd rather have a free float rail system, but prices today for more expensive free float systems are pretty steep and most require an gunsmith to install them.

I've used Surefire rails, DD Omega rails and now the MI two piece rail system, just to save some money on another build with a 10.5" barrel. I'm very please with the craftmanship of this rail system, especially for it's price tag.

While it's a free float system, if your not hanging too much gadgetry off the rail you will not notice any POI shift with system. If you do hang a PEQ/2, light with mount, forgrip and Bi-Pod you will notice a bit shift that would not be there with free float system.

If your only going to hang a light and forgrip off of this system, then it's not going to hurt you to save some money from other big name manufacturers. Good system, easy install and your on your way !!

Was this review helpful to you?

1 of 1 people found the following review helpful:

Great	August 5, 2008
Reviewer: Zach

Very happy with this handguard. Very simple install and a lot cheeper than the competition. Great product!

Was this review helpful to you?

0 of 0 people found the following review helpful:

MI Handguards are Awesome	July 20, 2008
Reviewer: Rafael�Lugo from Orange Park,�FL�United States

I will have to agree with another person that wrote a review for this handguard. I too, made the mistake of buying a CCA handguard and it sucked bad! There was too huge of a gap between the two pieces and it did not fit tightly! I ordered myself an MI carbine handguard and Im ready to throw this CCA handguard in the garbage.

Was this review helpful to you?

1 of 1 people found the following review helpful:

Great handguards!!	July 17, 2008
Reviewer: adam�shinsky from avon,�OH�United States

I had put a cca aluminum handguard on my m4.. That was a mistake! It was loose and moved around and my accessories did the same!! Then i put on the mI17.. What a handguard!!! ROCK SOLID!! And your accessories that mount to it will be rock solid also... A must buy for the anybody looking for a great handguard!!!!A+++++++++++++++

Was this review helpful to you?

0 of 0 people found the following review helpful:

Great Product	April 24, 2008
Reviewer: Michael from Grand Junction, CO United States

This rail fits great and has an awesome look to it! Only took about 5-10 mins to install and is nice and tight!

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Tactical Handguards: Daniel Defense, YHM, LaRue Tactical, Troy Ind, Midwest Industries, etc
Tactical Handguards: Daniel Defense, YHM, LaRue Tactical, Troy Ind, Midwest Industries, etc > Non Free Float