Reviewer:
William Haddock
from Battle Creek, MI United States
I could not install the part as received because the releif in the trigger for the disconnector was not deep enough. 5 mintues with a dremel took enough metal off the disconnector to remedy the problem, but I shouldn't have needed to do that. The trigger is smooth though.
Was this review helpful to you?
0 of 0 people found the following review helpful:
Not Bad
May 15, 2012
Reviewer:
Mark M
from fremont, CA United States
Just put together my buddies lower today with these.Good quality. Trigger pull brand new is better than another brand I own thats broken in thoroughly. Decent trigger from the start, anxious to see how it will feel with 1000 rounds on it. Will be buying another in the future.
Was this review helpful to you?
1 of 1 people found the following review helpful:
Good Kit, But....
June 28, 2010
Reviewer:
JW
from Lakewood, WA United States
This was a great kit with all the parts including a couple of extra small detents. You know, the ones that fly out across the room (pivot pin detent). Trigger pull was good and crisp. Not crunchy. But the Hammer I received did not have a notch in it and the Head of the takedown pin was oversize for my Daniel Defense lower. Never had this happen before so I checked my spare kit and found half of my spares measured .372 and the rest like this one measured .398 across the Head of the pin. Used a smaller pin and am gtg. Think kit is OK but Lower has reinforcing band and wasn't relieved so head could seat all the way in. Very strange.
Was this review helpful to you?
1 of 2 people found the following review helpful:
Seems good for standard kit
April 2, 2010
Reviewer:
Suburban
from DelCo, PA United States
My "go to" gun is built on a Stag lower that I bought assembled. It is a good, standard, "milspec" type semi-auto LPK, no more no less. Have beat on this rifle pretty good, without any real issues. The bolt catch doesn't get along well with the Magpul BAD (loose fit, and stoppages). The notched hammer is not compatible with Colt-type 9mm bolts, which is just about anything but Olympic, and it may not work with the Olympic either.
Was this review helpful to you?
2 of 2 people found the following review helpful:
PERFECT
December 14, 2009
Reviewer:
Sean C.
from TX United States
Installed into my SW lower. Everything fit perfect and functioned perfect. Fast shipping too! Bravo!
Only one issue 
Not Bad 
PERFECT 