The EMOD is about one inch longer than the original Modstock and with the rubber butt plate installed, is about a quarter of an inch longer than the CRANE SCB. The increased length of the EMOD is a major benefit when used on scoped rifles (SPR/DMR), as it increases the available comb for any given length of pull. 

The buttplate of the EMOD is slightly wider and longer at the toe than the regular M4 stock with a noticeable negative pitch, making transitions from the ready feel much more natural. The EMOD was given enough weight to help balance out the normally muzzle heavy feel associated with negative pitch buttstocks.

The toe of the buttplate is rolled under; giving the EMOD a superior feel when the weapon is held in the “out of pocket” heads up hold. The buttplate is covered with a removable rubber buttpad that is molded over a metal strike plate. The shape of the buttplate and the rubber buttpad give a solid stock purchase in all situations. 

The EMOD features more storage in the removable, waterproof side compartments; the EMOD holds up to four CR123 or three AA batteries. There is also an additional weather proof compartment in the clubfoot area of the stock, this compartment can be accessed quickly and holds two AA batteries or other small parts. 

Constructed from the finest materials, the EMOD will stand up to the most rugged demands. The EMOD is available for either the standard “MilSpec” receiver extension tube, or for the aftermarket “Commercial” size tube. Available colors include Black, Foliage Green and Flat Dark Earth (tan). The EMOD is only available in the Clubfoot model.