Home > Stocks, Grips, and Handguards: Vltor, Magpul, Tango Down, etc > Stocks > VLTOR Stocks >

  Vltor Carbine EMOD - (Milspec) BLACK (Stock Only)

Vltor Carbine Enhanced Modstock
Vltor Carbine Enhanced Modstock Clubfoot


 
Alternative Views:


List Price: $126.00
Our Price: $119.65

Stock Status:In Stock
Product Code: VLTOR-AEB-MB-EMOD-M-BLACK
Qty:

Description FAQs
 

Carbine Enhanced Modstock for your AR15, M4, M16. This will only fit on Milspec dimension receiver extensions (buffer tubes). (Vltor, Colt, LMT, CMT, Stag Arms, BCM)

EMOD Stock - (Stock Only) - For a Milspec receiver extension/buffer tube - Color Black

The EMOD is based on the same rugged and practical design as the original Vltor Modstock – with specific features designed from lessons taken from the modern battlefield.


The EMOD is about one inch longer than the original Modstock and with the rubber butt plate installed, is about a quarter of an inch longer than the CRANE SCB. The increased length of the EMOD is a major benefit when used on scoped rifles (SPR/DMR), as it increases the available comb for any given length of pull.

The buttplate of the EMOD is slightly wider and longer at the toe than the regular M4 stock with a noticeable negative pitch, making transitions from the ready feel much more natural. The EMOD was given enough weight to help balance out the normally muzzle heavy feel associated with negative pitch buttstocks.


The toe of the buttplate is rolled under; giving the EMOD a superior feel when the weapon is held in the “out of pocket” heads up hold. The buttplate is covered with a removable rubber buttpad that is molded over a metal strike plate. The shape of the buttplate and the rubber buttpad give a solid stock purchase in all situations.

The EMOD features more storage in the removable, waterproof side compartments; the EMOD holds up to four CR123 or three AA batteries. There is also an additional weather proof compartment in the clubfoot area of the stock, this compartment can be accessed quickly and holds two AA batteries or other small parts.

Constructed from the finest materials, the EMOD will stand up to the most rugged demands. The EMOD is available for either the standard “MilSpec” receiver extension tube, or for the aftermarket “Commercial” size tube. Available colors include Black, Foliage Green and Flat Dark Earth (tan). The EMOD is only available in the Clubfoot model.


EMOD at a glance

Style

Clubfoot with Butterfly Latch

Colors

Black, FDE Tan, Foliage Green

Receiver Extension Tube Type

Available for MilSpec or Commercial

Length w/buttpad

7.75 inches (at centerline of tube)

Weight

14oz

LOP fully collapsed

11.5 inches

LOP fully extended

14.75 inches

Buttpad angle

-5 degrees with decrease to -15 at toe.

Sling Attachments

Standard military and Quick Disconnect Swivel Socket accessible from both sides.

Storage

Total of 8ea CR123, or 6ea AA batteries in storage tubes. Additional storage for 2ea AA batteries or small parts in quick access compartment.



Average Customer Review: 5 of 5 Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
 
EMOD October 27, 2012
Reviewer: Matt from NC United States  
Have an EMOD on my personal rifle and it is a night and day improvement compared to the M4 stock. It's rock solid, comfortable and lots of storage for batteries or what ever else you want to put in it. Vltor has a real winner with this stock and I planning to get another EMOD for the rifle I'm building now.

Was this review helpful to you?

  4 of 4 people found the following review helpful:
 
Doesnt get any better! May 7, 2009
Reviewer: JOHN GARCIA from HOUSTON, TX United States  
What another high quality add on from VLTOR! Do you not want to pay 200$ for a LMT SOPMOD? Choose the EMOD!!

It makes for a more natural cheek weld and a very natural sight alignment, I would HIGHLY recommend this to any AR15/M4 owner that already has a collapsible stock. It just feels very comfortable like this should be the standard stock that all M4's come with...

Was this review helpful to you?

  1 of 2 people found the following review helpful:
 
AR-15 EMOD VLTOR STOCK March 28, 2009
Reviewer: Bily in nashville from  United States  
WHAT A GREAT UPGRADE MY COLT AR-15...QAUILTY 100% ...IF YOU AL-RREADY HAVE A COLLAPSIBLE STOCK THIS IS ALL YOU NEED AND IT GOES ON IN A SNAP...MIGHT WANNA GRAB A BUTTON STRAP LINK...IF YOU LOOK CLOSE AT THE STOCK PIC YOU'LL SEE A MILLED OUT HOLE WHERE YOU JUST POP IN A STRAP LINK...

Was this review helpful to you?

  2 of 3 people found the following review helpful:
 
Just get this one January 15, 2009
Reviewer: justen parks from lombard, IL United States  
Better than my friends' Magpul and SOPMOD stocks.  Awesome cheek weld and TONS of storage.  Don't bother looking at anything else.

Was this review helpful to you?

  12 of 12 people found the following review helpful:
 
Vltor or SOPMOD ??? December 28, 2007
Reviewer: Scott Anson from Highland Heights, KY United States  
I've owned LMT SOPMOD stocks for several AR15's and have alway's given them a thumps up as the only stock to have running on your AR platform. NOT ANY MORE !!!!

The Vltor EMOD is now my rec" to anyone wanting to upgrade their AR stock. This is the best, bar none, on the market today. More battery storage, solid fyberglass supported thermo plastic constuction, an inch longer than the LMT SOPMOD and a rubberized strike plate with a slight curve or "Clubfoot" that makes shooting in the "HIGH" position more comfortable with body armor and kit.

If your trying to decide between stocks, just skip the rest and go straight to the Vltor EMOD stock. You won't be dissapointed.

Was this review helpful to you?


Browse for more products in the same category as this item:

Stocks, Grips, and Handguards: Vltor, Magpul, Tango Down, etc > Stocks > VLTOR Stocks
Stocks, Grips, and Handguards: Vltor, Magpul, Tango Down, etc > Stocks
Stocks, Grips, and Handguards: Vltor, Magpul, Tango Down, etc