BCM® BFH 16" Mid Length Complete Upper Receiver Group w/ MCMR-13 Handguard

MSRP: $1,042.95
Your Price: $819.95
(You save $223.00 )
SKU:
BCM-URG-MID-16-BFH-MCMR-13
Maximum Purchase:
5 units
Caliber:
5.56 NATO
Barrel Length:
16in
Barrel Style:
BFH
Handguard:
MCMR-13
Stock Status:

Out of stock

About the BCM® BFH 16" Mid Length Complete Upper Receiver w/ MCMR-13 Handguard

All BCM® Upper Receiver Groups with a MCMR Handguard Include:

  • One 3" Picatinny Rail Section
  • One BCM MCMR Sling Mount

Manufactured by Bravo Company MFG, Inc. (BCM)

These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
 
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.

Cold Hammer Forged Barrels

This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)

M4 Feed Ramp Barrel Extension and Upper Receiver

In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps.
 
This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.

T-Marked Upper Receiver

The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.

USGI 1/7 Twist Rate

The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.

Mil-Spec Barrel Steel (Certified Mil-B-11595E)

BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.

Chrome Bore and Chamber

One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.

Manganese Phosphate Barrel Finish

Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.

5.56 NATO Chambers

The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammounition. 

Government Barrel Profiles

Duty rifles are built to be carried - day in and day out. The USGI barrel profiles (often referred to as the Government Profile) enable the operator to carry their weapon for longer periods of time and deploy them faster than the heavier commercial H-Barrel counterparts. The government profile barrel is also compatible with the current M203 mounting systems.

HPT / MP Inspected Barrels

Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.

Shop Related Products:

Want to see more upper receivers? Click the links below to view more BCM® AR complete uppers!

 

Bravo Company builds: Life Saving Tools™
 
Copyright 2023 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

18 Reviews

  • 5
    This upper is awesome

    Fits perfectly on my Bcm lower. The upper has a cold hammer forged barrel, a mid length gas system, a great light weight rail, and hasn't had any malfunctions on me. What more could you ask for? Thanks for the great product Bcm.

  • 4
    BCM BFH 16" mid length upper w/ 13" mcmr handguard

    Awesome quality upper. As I would expect anything from Bravo Company.

  • 5
    BFH 16"

    Very impressed on how fast I recieved my order. Everything is perfect. Took it out of the package and put it on my colt lower receiver right away and it fit right on. Can't wait to put some rounds through it.

  • 5
    Great upper!

    I purchased this upper receiver and included the bolt carrier group and 3x3 ambi charging handle. I was thoroughly pleased that BCM sent all of it assembled so I didn’t have to! It is a perfect weight for me and for my first rifle build, I am very happy with the quality and service from BCM. 10/10 would buy again

  • 5
    Exceptional Quality

    I highly recommend this product. You can never go wrong with BCM. Thank you!!!

  • 5
    Love it

    durable, reliable, and looks awesome!

  • 5
    5 Stars

    Excellent quality. Fast shipping. Courteous and professional communications. Thank you!

  • 5
    Great upper

    Review body is empty

  • 5
    BCM is the $hit

    I have over some years now bought BCM products for one simple reason, quality. Every single part, BCG, upper, grips and Lower parts kit I have bought has been perfect. Never had a single issue or gripe about their product. Recently I had a small DIY gun shop install my BCM KMR on an 11.5 upper and they screwed something up because I was having FTE/FTF issues with all different types of ammo. Emailed BCM and after some evaluation they decided to send me a paid shipping label and do a complete FREE inspection for me. Now I will have confidence in that upper knowing it's a true BCM gun again. Will be buying from them for life! Thanks for your hard work guys, here at BCM, and all of our military and LE. Putting foot to a$$ for this great country and getting paid to do so!!