Home > AR15 Upper Receiver Groups > BCM® Upper Receiver Groups with MCMR (M-LOK®) Handguards >

BCM BFH 11.5" Carbine Upper Receiver Group w/ BCM MCMR-10 Handguard (NFA)

BCM BFH 11.5" Carbine Upper Receiver Group w/ BCM MCMR-10 Handguard (NFA)
BCM BFH 11.5" Carbine Upper Receiver Group w/ BCM MCMR-10 Handguard (NFA)


 
Alternative Views:


List Price: $844.95
Our Price: $664.95
You save $180.00!


Stock Status:In Stock
Product Code: BCM-URG-11-BFH-MCMR-10

Add BCM® Bolt Carrier Group with Upper Group

Add BCM® Bolt Carrier Group?*:

The one and only BCM® milspec Bolt Carrier Group!
Charging Handle Options


Muzzle Device



Qty:  
Description FAQs
 
PLEASE NOTE: These batches will sell out quickly.
If the Stock Status is Out of Stock and you would like to get notification when more product arrives, please click the "Email me when Back-In-Stock" link under the Add To Cart button. You will get immediate notification of all new arrivals of product.
If you get an email notification and you check back again with our website to see that the product has already again sold out, please click the link again and add your email to the notification list.
Please check back with our website often. Sorry but we cannot take pre-orders or backorders on these products.
Professional Grade Weaponry, by BCM®
Made by Bravo Company MFG, Inc. (BCM) These Barreled Upper Receiver Groups are designed for shooting professionals with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.
Cold Hammer Forged Barrels
This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH™ series of barrels are made right here in the USA! (Just like all the BCM products.)
M4 Feed Ramp Barrel Extension
M4 Feed Ramp Flat Top Receiver
In developing the USGI M4 carbine as one of the primary weapons for today’s infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM uppers and all BCM barrels.
T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military and private security personal for its’ superior ballistics.
Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. The 4150 grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade 4150 steel gets its’ additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960’s was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and on the USGI M16/M4 rifles will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military ammo.
Government Barrel Profiles
Duty rifles are built to be carried - day in and day out. The USGI barrel profiles (often referred to as the Government Profile) enable the operator to carry their weapon for longer periods of time and deploy them faster than the heavier commercial H-Barrel counterparts. The government profile barrel is also compatible with the current M203 mounting systems.
HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
Copyright © 2010-2018 Bravo Company MFG, Inc.
Features
  • Cold Hammer Forged Barrel
    M4 Feed Ramp Barrel Extension
  • M4 Feed Ramp Flat Top Receiver
  • T-Marked Upper Receivers
  • USGI 1/7 Twist Rates
  • USGI 5.56 NATO Chambers
  • Mil-Spec 11595E - Certified Barrel Steel (CMV)
  • Chrome Lined Bore and Chamber
  • Manganese Phosphate Barrel Finish
  • USGI Government Profile Barrels
  • HPT (High Pressure Test) Barrels
  • MPI (Magnetic Particle Inspected) Barrels

Average Customer Review: 5 of 5 Total Reviews: 23 Write a review.

  0 of 0 people found the following review helpful:
 
Great service great product April 14, 2019
Reviewer: Anonymous Person from PA United States  
I’ve always been a fan of BCMs products. This was my first purchase of something other than accessories. Fit and finish on this upper is great. I ordered it and had it in my hands within a week. They even check to verify my ship to address, great fraud protection. Only about 300 rounds through this upper so far but I am confident in its performance and function. This upper has a solid place in my line up and probably will be a part of my most used rifle as the future continue to proves it is a great upper

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Excellent Quality April 10, 2019
Reviewer: Anonymous Person from El Paso, TX United States  
The quality, fit, and finish are excellent on this upper assembly.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
11.5” bfh mcmr upper April 10, 2019
Reviewer: John Williams from Bryant , AR United States  
Yet another perfectly built upper from Bcm. Arrived at my doorstep within the same week I bought it and came beautifully packaged with tons of extras. I couldn’t be anymore pleased. If you’re searching for an 11.5” upper in 5.56, this is it. I’ve been buying from Bcm for many years now and I’ve yet to experience anything less than 100% satisfaction. Dont think twice. Buy BCM.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
BFH 11.5 UPPER April 10, 2019
Reviewer: Scott Edrington from Danville, IN United States  
Couldn't be more happier. Every thing was better than expected from fit  and finish to the packaging was top notch.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Excellent product. April 10, 2019
Reviewer: Dean Smith from El Paso, TX United States  
This was part of my A.R. pistol build. This is an excellent product at a reasonable price. You can’t do better.This was part of my A.R. pistol build. This is an excellent product at a reasonable price. You can’t do better.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

AR15 Upper Receiver Groups > BCM® Upper Receiver Groups with MCMR (M-LOK®) Handguards
AR15 Upper Receiver Groups
AR15 Upper Receiver Groups > BCM® Upper Receiver Groups (All)
AR15 Upper Receiver Groups > BCM® Upper Receiver Groups (All) > BCM Upper Receiver Groups with BFH™ Barrels
NEW** Products - Just In
AR15 Upper Receiver Groups > 11.5" Carbine Upper Group