For 1913 Mounted Lights - KeyMod
ambidextrous: made to mount flush or cantilever off either the left or right
side of the rail system.
high and low mounting position for the 1913 rail section.
most common 1913-rail pistol/weapon light systems
mounting holes for ideal placement.
to mount on the 3 or 9 o’clock rail positions.
Aluminum construction. Intently designed to be low-profile and snag-free
Pending mounting system
added weight, 0.9 oz.
BCM US Patent Number 9,377,274
1. Ensure the weapon system is unloaded
and clear, prior to performing any maintenance .
2. With supplied Torx™ wrench, loosen
(counter clockwise) and remove the two mounting screws and the one recoil lug
screw (reverse thread).
3. Of the six mounting position holes on
the mount, select the desired holes for all three screws. Note: mounting screws
and recoil lug screw placement will vary, depending on mount placement, left or
right hand side of the rail.
4. With the mounting screws location
selected and the screws loosened, locate the desire KeyMod placement on the
rail system, install and slide forward until it travels no further.
5. Select high or low position for the
1913 rail section and install the screws.
6. Tighten all screws (clockwise) until
firmly secured (30 in-lbs) For a better, more secured hold, use blue thread
locking compound on mounting screw thread only.