BCM® Standard 11.5" Carbine Barrel, Stripped

MSRP: $350.00
Your Price: $279.00
(You save $71.00 )
SKU:
BCM-BRL-s-11-STD
Maximum Purchase:
5 units
Stock Status:

Out of stock

(.750) at Gas Block location
Approximate Weight: 1lb 5oz.
 
 
PLEASE NOTE: These batches can sell out quickly.
If the Stock Status is Out of Stock and you would like to get notification when more product arrives, please click the "Email me when Back-In-Stock" link under the Add To Cart button. You will get immediate notification of all new arrivals of product.
If you get a email notification and you check back again with our website to see that the product has already again sold out, please click the link again and add your email to the notification list.
 
Please check back with our website often. Sorry but we cannot take pre-orders or backorders on these products.
 
 
Life Saving Tools, by BCM®
 
 
These are stripped 11.5" carbine gas Standard 11595E barrels with gas ports installed and dimpled for a strong gas block installation.
 
 
 
M4 Feed Ramp Barrel Extension
In developing the USGI M4 carbine as one of the primary weapons for todays infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM barrels.
 
 
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military and private security personal for its superior ballistics.
 
Mil-Spec Barrel Steel (Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. The Mil-Spec grade steel gets its additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
 
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960s was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and on the USGI M16/M4 rifles will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
 
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
 
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military ammo.
 
 
Government Barrel Profiles
Duty rifles are built to be carried - day in and day out. The USGI barrel profiles (often referred to as the Government Profile) enable the operator to carry their weapon for longer periods of time and deploy them faster than the heavier commercial H-Barrel counterparts. The government profile barrel is also compatible with the current M203 mounting systems.
 
HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
 
Copyright 2009 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

22 Reviews

  • 5
    11.5" Barrel

    Excellent quality from workmanship to function. None other compare to this for the price range.

  • 5
    tremendous! phenomenal!

    Very impressed with the quality and extremely happy that I chose BCM for my barrel replacement. Went from Ballistic Advantage 10.5inch to this BCM 11.5inch.
    11.5inch is just superior and the fact that BCM made it makes it even better. If you just have a BCM barrel on you, you might not be able to appreciate the quality difference but put it next to most other barrel ans you will see how well made BCM barrels are. Definitely recommend it.

  • 5
    works well even as a left hand upper

    I used this barrel with a Geissele super gas block and MK14 rail and no modifications were needed. I used a MEGA arms barrel previously and had to smoothen out the gas block land for a Geissele super gas block to fit, this went on perfectly. The build is a STAG left hand upper and NiB BCG and has ran fine without issues.

  • 5
    Excellent Product/Experience

    Loving my new BCM barrel. Quality is excellent and BCM, was a pleasure to do business with. Great service, fast delivery!

  • 5
    11.5 carbine barrell

    This is just another great product from BCM! Fit and finish is amazing. Pre-drilled for gas block is awesome. Products always come in a timely manner. Thank you BCM!

  • 5
    Customer review

    Review body is empty

  • 5
    11.5 barrel

    I spent weeks researching on barrels for my at pistol build. After all the time I took looking at all my options I went with Brovo Company. I was not disappointed. The first great thing was the very fast shipping. I ordered on Saturday it was at my house Tuesday. I opened my well packed barrel and examined it. Not a single issue. Well made the specs matched exactly to what was said on the website. I’m excited to complete my build with brovo company.

  • 5
    Customer review

    Review body is empty

  • 5
    11.5” barrel purchase

    My product was awesome. Shipping was fast. The best part was all the stickers that I received.