Specially Formulated Synthetic Blend
SLiP2000™ Lubricant is truly an ALL IN ONE synthetic
Gun Lubricant / Cleaner / Preservative
Formulated especially for use on automatic rapid-fire and repetitive shooting firearms black powder, shotguns, rifles and pistols.
SLiP2000™ Lubricant contains an exclusive metal treatment designed to control friction, which reduces heat, which eliminates excessive wear. It penetrates the micropores of the metal surfaces bonding itself to the metal allowing lubrication from within the metal itself.
DOES NOT Contain any Silicone or PTFE (Teflon*) type ingredients. Never gets sticky or tacky. Does not attract dust, dirt or grime like a petroleum product.
It's just like seasoning a frying pan, the more you use it, the less anything will stick!
SLiP2000™ Lubricant was designed and formulated with multiple uses and extreme high performance requirements and conditions in mind. SLiP2000™ Lubricant will outperform all other Lubricants in its class in severe weather conditions, high humidity, rain, sleet, and snow working from -130 deg. F to + 1250 deg F
Approved by Aberdeen Proving Grounds
SLiP2000™ Lubricant has passed and been approved for use in dusty environments (Iraq) on the M16 and smaller weapons by Aberdeen Proving Grounds. Additional testing still ongoing.
Exceeds current MIL-SPEC-63460D
SLiP2000™ Lubricant has had to go through many testing stages. One of the product guide lines that was followed was MIL SPEC 63460D for the US government. SLiP2000™ Lubricant has passed all test requirements set forth for this spec and in fact as exceeded many requirements.
Increased pattern consistency
Decreased recoil and build-up of wadding
Decreased malfunctions or jamming
SLiP2000™ Lubricant and its unique formulation penetrates powder residue, carbon, copper, lead and plastic wad fouling. It will break the contaminants free and flush away trapped dirt, grit and grime. SLiP2000™ Lubricant will cut through built up carbon, copper and lead. What s left behind is a barrier that has bonded with the metal that will continue to lubricate and protect against corrosion. This film does not attract dust and it will also keep new firing residue from sticking again. After your first complete cleaning with SLiP2000™ Lubricant you will see an amazing difference in the time and ease with which your next cleaning will take place.
Apply our SLiP2000™ Lubricant to all moving parts. Ejectors, chambers, actions, firing pins, bolts, hinge pins, receiver etc. Be sure to apply a coat in the barrels also using proper techniques. After you have used SLiP2000™ Lubricant to clean and lubricate all moving parts including the chokes in a shotgun, burned on carbon and plastic wad fouling is removed very easily with your normal cleaning.
Automatic and Semi-automatic weapons such as the M16 - AR15
Apply our SLiP2000™ Lubricant to all moving parts. Ejectors, chambers, actions, firing pins, bolt, magazine, receiver etc. Be sure to apply a coat in the barrels also using proper techniques. The same thing is true with revolver cylinders. Apply SLiP2000™ Lubricant to the face of the cylinder and a light coat in the chamber. After you have shot a few hundred rounds, just take a little SLiP2000™ Lubricant on a rag and wipe the carbon away. It is that simple. No more digging / scraping or fighting with special tools and expensive toxic cleaners! SLiP2000™ Lubricant makes clean up a breeze.
SLiP2000™ Lubricant and its unique formulation penetrate into the smallest, tightest areas that oils do not go. This allows it to replenish the lubricant that has been lost during operation and provides a long lasting protective coating that reduces friction to a minimum and almost stops metal to metal wear. SLiP2000™ Lubricant forms a barrier that will then protect all parts and will allow them to work smoother and last longer.
SLiP2000™ Lubricant and its unique formulation provide a long lasting barrier on all metal parts and does not attract dirt or other abrasive contaminants. Displaces moisture and prevents rusting. Proprietary formulation was developed to Clean / Lubricate / Protect and out last any other product on the market today! We have done this without adding any oils, petroleum distillates or harmful PTFE type ingredients. SLiP2000™ Lubricant was developed with our health, safety and the environment in mind.
Shotgun users will see
Automatic and rapid firearm users will see
Increased pattern consistency
Increased bolt action
Increased Muzzle velocity
Decreased recoil, friction, heat and wear
Decreased Malfunction or jamming
Will not attract dust, dirt or sand like petroleum products.
Will not harden or become tacky.
Will not dry out and leave unprotected metal behind.
Will reduce cleaning frequency
No need for 5 or 6 other potential dangerous cleaners.
Contains No Petroleum distillates or other toxic ingredients.
Simple to use
Apply to all moving parts of the mechanism and all parts that require lubrication and / or protection from corrosion