Home > Stocks, Grips, and Handguards >

Vltor Basic IMod Stock - CLUBFOOT (TAN/FDE) (Stock Only)

Vltor Basic IMod Stock - CLUBFOOT
Vltor IMod Stock

List Price: $100.00
Our Price: $94.95

Stock Status:(Out of Stock)
Product Code: VLTOR-AIB-MCT


The improvements of the IMod are as follows: Integral, but removable non-slip buttpad (color matched to stock components)

  • Rolled/angled buttpad toe with wide traction area. This will assist in running the stock high on shoulder, making the IMod system more user friendly when using web-gear and/or body armor.
  • Improved lock paddle, making it easier to operate and making the contact surface non-slip when operating the lever.
  • Removed most sharp edges that may cause “snag points” to web-gear or other vital equipment.
  • Improved strength throughout construction of the stock chassis. This will provide maximum strength during “Mortaring exercise” or unexpected impact.

IMOD at a glance:

Design Removable rubber buttpad and storage compartments. A true Modular buttstock for the AR15/M16/M4 carbine series.
Construction Impact and temperature resistant polymer, specially blended for Vltor. Metal components are either carbon steel or stainless steel (depending on the application)
Compatibility Milspec IMods will only fit receiver extensions/buffer tubes with the outer diameter of 1.150”.
Weight - Nominal Less than 9.4 oz. (with storage compartment and buttpad installed)

Length: 6.250” (without buttpad)
Length: 6.626” (with buttpad)
Width: 2.500” (with storage compartments installed)Height: 5.210” (with buttpad installed)

Color Finish All stocks have a matte (anti-reflection/glare) finish. IMods are only available in the following colors: Black, Flat Dark Earth (Tan) and Foliage Green. Foliage Green is more of a “grey” green versus Olive Drab.
Special Features

Storage capacity: Each side compartment can hold at least two AAs or three lithium CR123 3-volt batteries. The internal diameter of each compartment is 0.685”.

Sling mounting: All Modstocks, including the IMod will accept a push-button, quick detachable sling swivel or a conventional web sling, measuring up to 1.375” in width. .
The compartment has a bore, accessible from either end, which will house any item measuring no more than 0.680 of an inch in diameter. The bore dimension was specifically developed to access the 3-volt lithium battery most commonly used in tactical flashlights. The compartment is enclosed on both ends with water and element resistant locking caps, which seals the compartment's bore.
The Modstock system is made from a special glass filled nylon and metal components. The nylon has been specially formulated to be lightweight, high strength and impact, temperature, and chemical resistant. The metal components are stainless steel or quality carbon steel, finished in manganese phosphate to a MIL-SPEC standard.
This stock is made to fit over your Mil-Spec dimention receiver extention. (Colt, Vltor, BCM, CMT, LMT, Stag Arms)
As this stock was originally designed as a military replacement/upgrade to the USGI Colt M4 stock, it is made to Mil-Spec dimentions. It will not fit on commercial dimention receiver extentions.
This product includes:
Stock Body
Storage Compartments
Compartment Caps and Compartment Mounting Hardware
Not Included: Mil-Spec receiver extention, end plate, lock nut, buffer, action spring

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
5 of 5 Perfect stock for those with shorter arms. September 22, 2016
Reviewer: Nix113 from GA United States  
I bought this stock for a rifle build for my girlfriend. I was looking for something with a short length of pull when fully collapsed and lightweight. She stands about 5'4 and had trouble managing the weight/ length of my 14.5 pinned AR which has the magpul acs-l stock. This fit the bill perfectly, the shortened length of pull let her shoulder the gun much easier. I was considering one for my rifle because I liked hers so much. It locks up nice and tight with very little play. However I have a socom profile heavy barrel and the stocks just too light to balance out the front end of my rifle. I will be purchasing another for the next lightweight build I put together though.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 simply the best! June 21, 2010
Reviewer: Derek from AZ  
Vltor makes some of the best products for your M4/ AR15 and this new design buttstock is great! ordered on tuesday and had it on my rifle thursday, went right on my mil spec buffer tube like a glove. thanks BCM!

Was this review helpful to you?

Browse for more products in the same category as this item:

Stocks, Grips, and Handguards
Stocks, Grips, and Handguards > Stocks
Stocks, Grips, and Handguards > Stocks > VLTOR Stocks